Determination of the Physical-Chemical and Mineralogical Composition of the Vermiculite Sample of Tebinbuloq Mine

Authors

  • Tillaev Mirjalol Abdubanonovich Main Doctoral Student, Jizzakh Polytechnic Institute
  • Abdurakhmanov Ibrahim Mamat's son Talented Students, Jizzakh Polytechnic Institute
  • Nabiev Ahrorbek Nematjon's son Jizzakh Polytechnic Institute

Keywords:

Vermiculite sample, cooling, into powder, ground, chemical analysis, casting furnace

Abstract

In this article, 100 g of vermiculite sample was extracted and ground into powder in a vibratory mill. Then the sample was fired in a crucible casting furnace at a temperature of 400oC for 20 minutes. The fired sample was removed from the oven and placed in three separate special molds without cooling. Samples in the form of cooled tablets are installed in the working chamber of the THERMOFISHER - ARL Perform'X X-ray fluorescence spectrometer and chemical analysis is performed using a special program.

Downloads

Published

2023-05-03

How to Cite

Abdubanonovich, T. M. ., Abdurakhmanov Ibrahim Mamat's son, & Nabiev Ahrorbek Nematjon's son. (2023). Determination of the Physical-Chemical and Mineralogical Composition of the Vermiculite Sample of Tebinbuloq Mine. Vital Annex: International Journal of Novel Research in Advanced Sciences, 2(4), 169–174. Retrieved from https://innosci.org/IJNRAS/article/view/1211

Issue

Vol. 2 No. 4 (2023): April 2023

Section

Articles